Use the button above or message us on WhatsApp for a quote, technical documentation, or engineering support on the VS01A-46F.
The VS01A-46F carries its full 80kg rating through bracket geometry alone, since a fixed mount has no tilt mechanism or moving pivot to help distribute load the way an articulating arm can. Both the bracket arm and wall plate are stamped from a single 1.8mm cold-rolled steel sheet and reinforced at the stress points, holding the panel at a 30mm standoff with zero measurable deflection under full load. Every unit is validated to four times its rated capacity, a 320kg static test, before the 80kg commercial figure ships on the spec sheet.
Where this design earns its place is in permanent, no-adjustment installs: once positioned, the panel doesn’t move. An automatic spring-lock with a pull-cord release still lets a single technician detach it later for cable work or a service call, without needing a second person to brace the panel’s weight during removal.
The fixed-position design and 80kg rating put the VS01A-46F in large-format displays and video wall tiles for control rooms, trading floors, and command centers, where the viewing angle is fixed by the room layout and re-adjustment isn’t part of the operating plan. It also suits boardroom and lobby installations spec’d for a permanent position, and retail or hospitality digital signage where a tilt mechanism would add cost and failure points without adding function.
Where a project needs post-install angle adjustment, above-cabinet placement, or rear access without full panel removal, that’s a different mount category in the VSYS range (tilt, full-motion, or push-pull), not a variant of this SKU.
The wall plate mounts to a solid wall or double-stud assembly at 406mm, 450mm, or 600mm spacing, covering standard stud spacings used in UAE commercial fit-outs without requiring a custom backing plate. Direction indicators mark correct up/down orientation, and the included hook-on bubble level is used during the wall-plate step, before the panel bracket is attached. The panel sits at a fixed 30mm standoff once installed; there is no tilt or swivel adjustment on this model. Given the weight class involved, professional installation is recommended and available UAE-wide on request.
| Product Category | Fixed TV Wall Mount |
| Material | Cold-Rolled Steel |
| Metal Sheet Thickness | Bracket Arm: 1.8mm (0.071″); Wall Plate: 1.8mm (0.071″) |
| Surface Finish | Powder Coating, Fine Texture Black |
| Dimensions | 30 x 685 x 425mm (1.2″ x 27″ x 16.7″) |
| Fit Screen Size | 37″-86″ |
| Curved Panel Compatible | Yes |
| Mounting Hole Pattern | VESA and Universal |
| VESA Compatibility | 50×50, 75×75, 100×100, 100×150, 150×100, 100×200, 200×100, 150×150, 200×200, 200×300, 300×200, 200×400, 400×200, 300×300, 300×400, 400×300, 600×200, 400×400, 600×300, 600×400 |
| Maximum Mounting Hole Spread | 654 x 402mm |
| Weight Capacity | 80kg (176lbs) |
| Strength Test Rating | 4x rated capacity (320kg static load) |
| Standoff Profile | 30mm (1.2″) from wall |
| Wall Compatibility | Solid wall or double-stud, 406mm / 450mm / 600mm spacing |
| Wall Plate Type | Fixed (non-articulating) |
| Panel Attachment | Detachable panel bracket |
| Alignment Aid | Hook-on bubble level, included |
| Release Mechanism | Automatic spring lock with quick-release cord |
| Cable Routing | Open-architecture rear access (no dedicated cable channel) |
The VS01A-46F is strength-tested to four times its rated capacity, a 320kg static load, before the 80kg commercial rating is approved for the spec sheet. That gap between the tested load and the commercial rating is the real safety margin, validated in production rather than estimated from the steel gauge alone.
Yes. The bracket geometry is rated for curved panels within the same 37″-86″ screen size and 80kg weight limits as flat panels, with no separate curved-panel SKU or adapter required. The detachable panel bracket accommodates the curve at the display’s own VESA mounting points.
Up to a 654x402mm maximum hole spread, covering VESA patterns from 50x50mm up through 600x400mm, plus the less common 600x200mm and 600x300mm variants some panel manufacturers use. Twenty total patterns are covered, confirm the exact spec against the target display before ordering.
No. It uses an open-architecture rear design for port and power access instead of a dedicated cable channel or raceway, which keeps the standoff profile at 30mm. For fully concealed cable routing, a different mount in the VSYS range with an integrated cable channel should be specified instead.
Solid wall installation or double-stud mounting at 406mm, 450mm, or 600mm spacing, covering the standard stud spacings used in UAE commercial fit-outs. Direction indicators on the wall plate mark correct up/down orientation before the first fastener goes in.
No, this is a fixed-position mount with a 30mm standoff and no articulation once installed. Projects that need post-install angle adjustment, above-cabinet placement, or rear panel access without full removal should specify the VSYS tilt or full-motion range instead, not this SKU.
Yes. Given the 80kg weight class and the fixed, non-adjustable nature of the install, professional installation is recommended and available UAE-wide on request. Request it through the same quote form or WhatsApp used for pricing and availability on the VS01A-46F.
Tell us about your project and our team will recommend the right mounting solution for your display or video wall installation.
