Use the button above or message us on WhatsApp for a quote, technical documentation, or engineering support on the VSVW13-610T.
The VSVW13-610T is an industrial-grade push-pull video wall mount rated to 130kg per screen for 45″-110″ displays, built with a 2.5mm pickling-steel wall plate and a 2mm cold-rolled bracket arm. A 120-325mm profile range lets each panel pop out on rails for service access, then push back into alignment, and toolless micro-adjustment (13.5mm depth, 13mm height per panel) closes the gaps between tiles without a wrench or screwdriver.
The frame is validated to 4x its 130kg commercial rating, and a modular design means additional panels can be added to a video wall array, or reconfigured into a different grid, without replacing the mounting hardware. A pop-out lock system prevents accidental disengagement once a panel is pushed back into its final position, and an anti-theft mechanism secures each panel independently.
The 130kg rating and modular tile system put the VSVW13-610T in control rooms, trading floors, retail video walls, and digital-signage arrays where the display isn’t a single panel but a multi-tile grid that needs consistent alignment and individual service access. The pop-out mechanism matters most in installations where technicians need to reach cabling or replace a single failed panel without dismantling the surrounding tiles.
It also suits corporate lobbies, transit hubs, and event spaces across the UAE and GCC running large-format modular displays, where the anti-theft locking and industrial-grade steel construction address public-facing security requirements a standard wall mount doesn’t. Where a project needs only a single fixed panel with no service-access requirement, a standard fixed or tilt wall mount from the VSYS range is the more cost-effective category.
The VSVW13-610T installs to a solid wall; the wall plate is mounted first, followed by the individual panel brackets attaching to each display’s VESA pattern (200×200mm up to 1000×600mm). Direction indicators mark correct orientation during the wall-plate step. Once each panel is hung, the push-pull mechanism and micro-adjustment screws are used to align tiles to each other rather than to a fixed reference point, so alignment is typically done panel-by-panel across the full array. Given the tile count and weight class on a typical video wall project, professional installation is recommended.
| Product Category | Push-Pull Video Wall Mount |
| Material | Steel, Plastic |
| Metal Sheet Thickness | Wall Plate: 2.5mm pickling sheet; Bracket Arm: 2mm cold-rolled sheet |
| Surface Finish | Powder Coating, Fine Texture Black |
| Dimensions | 640 x 120-325 x 544mm (25.2″ x 4.7″-12.8″ x 21.4″) |
| Fit Screen Size | 45″-110″ |
| VESA Compatibility | 200×200, 300×200, 400×200, 300×300, 400×300, 400×400, 600×400, 800×600, 1000×600 |
| Weight Capacity (Per Screen) | 130kg (286lbs) |
| Strength Test Rating | 4x rated capacity (520kg static load) |
| Profile Range | 120-325mm (4.7″-12.8″) |
| Fine Adjustment (Depth / Height) | 13.5mm / 13mm (0.53″ / 0.51″) |
| Tilt Range | +2° to -3° |
| Wall Compatibility | Solid wall |
| Anti-Theft | Yes |
| Cable Management | No dedicated channel |
| Direction Indicator | Yes |
The VSVW13-610T is strength-tested to four times its rated capacity, a 520kg static load per screen, before the 130kg commercial figure is approved for the spec sheet. That margin is validated against the 2.5mm wall plate and 2mm bracket arm under static load, not estimated from steel gauge alone.
Each panel pops out on rails through a 120-325mm profile range, giving technicians direct access to cabling or the panel itself without dismantling neighboring tiles. A kickstand design holds the panel open during service, and a pop-out lock system prevents accidental disengagement once it’s pushed back into position.
13.5mm of depth adjustment and 13mm of height adjustment per panel, both toolless, close the small gaps that accumulate across a multi-tile video wall grid. This is what keeps a large modular array looking like one continuous surface rather than a grid of slightly misaligned panels.
Up to 1000x600mm, covering nine patterns from 200x200mm through 300×200, 400×200, 300×300, 400×300, 400×400, 600×400, and 800x600mm as well. Confirm the exact VESA pattern on each target display against this list before ordering, since panels in a modular array may use different hole spacing.
Yes, that’s a core part of its design brief. An anti-theft mechanism secures each panel independently, addressing tamper risk in lobbies, transit hubs, and retail video walls where the display is accessible to the public rather than confined to a control room.
No dedicated cable channel is built into the mount; the open rear architecture and 120-325mm pop-out profile prioritize service access over concealed routing. For fully concealed cabling, plan a separate cable management solution behind the video wall structure rather than relying on the mount itself.
Yes. Given the tile count and weight class typical of a video wall project, professional installation is recommended so wall-plate positioning and panel-to-panel alignment stay consistent across the full array. Installation support is available UAE-wide on request through VSYS for control rooms and signage deployments.
Tell us about your project and our team will recommend the right mounting solution for your display or video wall installation.
