Use the button above or message us on WhatsApp for a quote, technical documentation, or engineering support on the VCM-CE1046D-02.
The VCM-CE1046D-02 splits its ceiling connection across two independent poles instead of one central column, distributing the 70kg rated load across twin structural anchor points rather than a single ceiling penetration. The frame combines steel and plastic components, and the twin-pole height adjustment covers a 695-1565mm range, a wider span than the single-pole CE1546 family’s telescoping mounts, useful where ceiling height varies significantly between candidate install locations.
Tilt runs +3° to -20° on the panel bracket, and the mount is strength-tested to three times its 70kg rated capacity, a slightly different testing multiple than the 4x standard used on the single-pole CE1546 family, reflecting the different load path a twin-pole design carries.
The twin-pole load path suits installs where a single central ceiling penetration isn’t structurally preferred, spreading anchor load across two points instead, common in retrofit ceilings, older structural slabs, or projects where the facilities engineer specifies distributed rather than concentrated ceiling load. The wider 695-1565mm height range also covers a broader mix of ceiling heights than a single telescoping pole typically reaches, useful when the same SKU needs to serve multiple rooms with different ceiling heights on one project.
This fits digital signage in retail and hospitality settings, classroom and training-room displays hung centrally rather than wall-mounted, and any install where the ceiling structure or local code favors two smaller anchor points over one larger one.
Both ceiling plates install first, spaced to the twin-pole geometry specified in the mount’s drawing, before the poles are set to a working height within the 695-1565mm range. The detachable panel bracket then mounts to the base of both poles, and the +3° to -20° tilt is set once the display is hung. Because load is split across two anchor points rather than one, confirm both ceiling locations can independently support their share of the 70kg rating before installation. Professional installation is recommended given the weight class and dual anchor requirement.
| Product Category | Double-Pole Heavy-Duty TV Ceiling Mount |
| Material | Steel, Plastic |
| Surface Finish | Powder Coating, Fine Texture Black |
| Dimensions | 1780 x 650 x 195mm (70.1″ x 25.6″ x 7.7″) |
| Fit Screen Size | 37″-80″ |
| Curved TV Compatible | Yes |
| Mounting Hole Pattern | VESA and Universal |
| VESA Compatibility | 300×200, 400×200, 300×300, 400×300, 400×400, 600×400 |
| Maximum Mounting Hole Spread | 600 x 400mm |
| Weight Capacity | 70kg (154lbs) |
| Strength Test Rating | 3x rated capacity |
| Height Adjustment Range | 695-1565mm (27.4″-61.6″) |
| Tilt Range | +3° to -20° |
| Pole Configuration | Twin independent poles, dual ceiling anchor points |
| Panel Type | Detachable Panel |
| Cable Management | Yes, routed within the poles |
The VCM-CE1046D-02 splits its ceiling connection across two independent poles and anchor points, distributing the 70kg load instead of carrying it through one central penetration like the single-pole CE1546 family. This suits ceilings where a facilities engineer prefers distributed anchor load, and gives a wider 695-1565mm height range.
695mm to 1565mm (27.4″ to 61.6″), measured on the twin poles from ceiling plate to panel bracket. This is a wider range than the single-pole CE1546 telescoping family, useful when the same SKU needs to cover more than one ceiling height across a multi-room project.
The twin-pole load path distributes the 70kg rating across two independent anchor points rather than one, which changes the structural testing basis compared to the single-pole CE1546 family’s 4x standard. Both approaches are validated in production testing; the multiplier reflects the different load path, not a lower safety standard.
Yes, both ceiling locations should independently support their share of the 70kg rated load, since the twin-pole design splits the connection rather than concentrating it at one point. Confirm both anchor locations against the mount’s drawing and the ceiling structure’s actual load rating before installation begins.
Coverage spans 300x200mm up to a 600x400mm maximum hole spread, across six patterns including 400x200mm, 300x300mm, 400x300mm, and 400x400mm. Confirm the exact VESA pattern on the target display’s rear panel before ordering, since not every 37-80 inch display uses the maximum 600x400mm spread.
Yes, the detachable panel bracket is rated for curved displays within the same 37-80 inch screen size and 70kg weight limits as flat panels, with no separate curved-panel SKU required. Confirm the display’s actual VESA pattern still falls within the 600x400mm maximum hole spread before ordering.
Other ceiling mounts in the same category:
Tell us about your project and our team will recommend the right mounting solution for your display or video wall installation.