Use the button above or message us on WhatsApp for a quote, technical documentation, or engineering support on the VTLX16M-612FW.
The VTLX16M-612FW is a motorized mobile TV cart rated to 120kg for 60″-110″ displays, built around a reinforced steel column (2mm cold-rolled bracket arm) with a powered lift motor controlled by a remote instead of a manual crank. The motor moves a 300mm height range at a steady speed under load, which matters most at this weight class where a manual mechanism would need real physical effort to reposition a 110″ panel.
The frame is validated to 3x its 120kg commercial rating and covers VESA patterns up to 1200×600mm, the widest single-pattern spread in the VSYS TV cart range alongside the VTLX18H-610TW. The design uses a simplified, uncluttered frame profile that keeps the visible mechanism minimal, which suits schools and corporate environments where the cart itself is part of the room’s visual presentation.
The remote-controlled lift and wide VESA range put the VTLX16M-612FW in shared classrooms, lecture halls, and corporate training floors running large interactive or presentation displays, where the same 60″-110″ panel needs to be repositioned for different instructors or user heights without physical strain on whoever is adjusting it. The minimal frame profile keeps the cart visually unobtrusive in spaces where the room’s presentation matters as much as the display itself.
It also suits UAE education and corporate rollouts standardizing on a single large-format cart across multiple rooms rather than mixing manual and motorized mechanisms. Where the same weight class is needed without motorized control, the VTLX12-610TW aluminum cart or VSYS’s manual telescopic carts are the lower-cost alternative at this size.
The VTLX16M-612FW ships partially assembled; the motorized column, base, and casters are bolted together first, followed by the bracket and support shelf. The panel bracket attaches to the display’s VESA pattern (100×100mm up to 1200×600mm) before it’s hung on the bracket, and the remote is paired to the base unit during setup. Given the display weight and the motorized mechanism, professional installation is recommended and available UAE-wide on request.
| Product Category | Motorized TV Cart |
| Material | Steel, Plastic |
| Metal Sheet Thickness | Bracket Arm: 2mm cold-rolled sheet (0.079″) |
| Surface Finish | Powder Coating |
| Color | Gunmetal Grey |
| Dimensions | 1377 x 801 x 1626-1926mm (54.2″ x 31.5″ x 64″-75.8″) |
| Column Size (Main / Extension) | 50 x 45 x 1.5mm / 43 x 38 x 1.5mm |
| Fit Screen Size | 60″-110″ |
| VESA Compatibility | 100×100 up to 1200×600mm (16 patterns) |
| Weight Capacity | 120kg (264lbs) |
| Strength Test Rating | 3x rated capacity (360kg static load) |
| Screen Quantity | 1 |
| Height Adjustment Mechanism | Motorized, remote control |
| Height Adjustment Range | 300mm, 1626-1926mm total cart height |
| Base Type | Caster, heavy-duty lockable |
The VTLX16M-612FW is strength-tested to three times its rated capacity, a 360kg static load, before the 120kg commercial figure is approved for the spec sheet. That 3x multiplier reflects the engineering margin standard VSYS applies at this size and weight class of motorized cart.
A remote-controlled motor drives the column through its 300mm range, replacing the manual crank a comparable cart in this weight class would otherwise need. Powered adjustment removes the physical effort of repositioning a 110″ panel by hand, which matters in shared classroom and training-room settings.
Up to 1200x600mm, one of the widest single patterns in the VSYS TV cart range, across 16 total supported patterns starting from 100x100mm. Confirm the exact VESA pattern on the target 60″-110″ display against the full specification before ordering, since interactive panels vary widely at this size.
An additional support shelf is included for equipment or presentation materials, separate from the display bracket itself. The frame profile is intentionally simplified and uncluttered, so cabling is not routed through a dedicated internal channel the way it is on VSYS’s pegboard-equipped carts.
Both are motorized, but the VTLX16M-612FW targets a slightly larger 60″-110″ screen range with a simplified frame and a 3x strength-test multiplier, while the VTLX18H-610TW covers 55″-100″ with a 4x multiplier and includes a camera shelf. Choose based on screen size, testing standard, and shelf requirements.
Yes. Given the display weight and the motorized mechanism’s electrical connection, professional installation is recommended and available UAE-wide on request through VSYS, covering the physical mount, VESA bracket attachment, and remote pairing during setup for schools and corporate deployments.
Tell us about your project and our team will recommend the right mounting solution for your display or video wall installation.
