Use the button above or message us on WhatsApp for a quote, technical documentation, or engineering support on the VSVW13-68T.
The VSVW13-68T is a pop-out push-pull display wall mount for 45″-90″ screens carrying up to 100 kg per screen, with VESA patterns up to 800×600 mm. It pushes open 190 mm from the wall for service access, so one panel in a video wall can be reached from the front without removing the displays beside it.
In the VSYS video wall range it sits between the VSVW13-48T (70 kg, 800×400 mm) and the VSVW13-610T (130 kg, 1000×600 mm). The bracket is steel with a black powder coat, strength-tested to 2.5 times its rated load, with tool-free knobs for height (+13 mm), depth (+13.5 mm), and tilt (+2/-3 degrees) so panels can be aligned edge to edge.
At 45″-90″ and 100 kg per screen, the VSVW13-68T suits control rooms, command centers, retail walls, and corporate signage where each display must be serviceable from the front. It is the specification for panels too heavy for a 70 kg mount but below the 130 kg class.
Where panels are 70 kg or less and landscape-oriented, the VSVW13-48T is the lighter option, and for displays up to 110 inches at 130 kg, the VSVW13-610T is the larger specification.
The VSVW13-68T mounts to a solid wall, with lateral bracket spacing adjustable from 200 mm to 600 mm. Verify the substrate’s load rating for 100 kg per screen before installation, and size the wall anchors to that load. Mount every bracket set to a common reference line so the tile array lines up after the final height and depth adjustment.
| Product Category | Video Wall Mount, push-pull |
| Material | Steel |
| Surface Finish | Powder coating, black |
| Assembly Envelope | 840 x 120-325 x 660 mm |
| Fit Screen Size | 45″-90″ |
| VESA Compatibility | 600×400, 600×600, 800×400, 800×600 |
| Maximum Hole Span | 800 x 600 mm |
| Weight Capacity | 100 kg (220 lbs) per screen |
| Strength Test Rating | 2.5x rated capacity |
| Wall-to-VESA Profile | 120 mm to 325 mm (4.7″ to 12.8″) |
| Lateral Shift Span | 200 mm to 600 mm (brackets) |
| Height Adjustment | +13 mm, tool-free knob |
| Depth Adjustment | +13.5 mm, two knobs, same direction |
| Tilt Range | +2 degrees / -3 degrees, two knobs, opposite directions |
| Pop-Out Extension | 190 mm, push-to-open/close service access |
| Screen Quantity | 1 per bracket set (tile in array) |
| Installation | Solid wall |
| Locking Kit | Per-panel lock, prevents accidental pop-out |
| Anti-Theft | Padlock-compatible hole (padlock not included) |
| Certification | RoHS compliant |
The mount pushes open by 190 mm from the wall, using a push-to-open and push-to-close action. That distance gives access behind a single display in a video wall, and the per-panel locking kit stops the panel opening by accident when the wall is in normal use.
Each bracket set is rated to 100 kg per screen, strength-tested to 2.5 times that rating, for 45″-90″ displays. Size the wall anchors and check the substrate’s load rating against 100 kg for every screen in the array, not only the heaviest panel in the wall.
It supports four patterns, 600×400, 600×600, 800×400, and 800×600 mm, with a maximum hole span of 800×600 mm. Lateral bracket spacing adjusts from 200 mm to 600 mm. Confirm the pattern printed on the display’s rear label before ordering the mount.
Alignment uses tool-free knobs: +13 mm of height, +13.5 mm of depth through two knobs turned in the same direction, and +2/-3 degrees of tilt through two knobs turned in opposite directions. Together these let installers match panel faces across the tile array.
The VSVW13-48T carries 70 kg for 45″-80″ panels, the VSVW13-68T carries 100 kg for 45″-90″ panels, and the VSVW13-610T carries 130 kg for panels up to 110″. Select by per-screen weight and VESA pattern rather than by diagonal size alone.
Tell us about your project and our team will recommend the right mounting solution for your display or video wall installation.
