Use the button above or message us on WhatsApp for a quote, technical documentation, or engineering support on the VCM-M06.
The VCM-M06 swings a 50kg-rated panel through 0° to +170° on a motor-driven arm, extending from a 775mm retracted profile to 1220mm fully extended, using 30x15x1.5mm and 30x20x1.5mm square steel tube arm sections and a 4.0mm wall plate. The DC motor runs on a 100-240V AC input stepped down to 12V DC at 1A, rated for under 50dB operation, and positions are set via an RF remote rather than a wired physical switch, so line-of-sight to the panel isn’t required to operate it.
Programmable position memory stores preset swing angles for repeat use, and a collision-avoidance function stops the motor if the arm encounters resistance mid-travel rather than continuing to drive against an obstruction. The panel bracket is detachable from the swing arm independently of the wall plate, and cable routes internally along the arm.
The RF-remote swing function fits installs where the panel needs to face different seating positions on demand without a technician present, hospitality suites and premium residential builds swinging a display between a lounge and bed-facing position, and lift-cabinet or credenza builds where the motorized swing arm operates from inside furniture rather than directly on an exposed wall. The under-50dB motor rating matters most in these close-proximity, quiet-room installs where a louder mechanism would be noticeable.
Corporate reception and boardroom builds also use the position-memory function to preset a small number of standard viewing angles rather than relying on a technician re-aiming the panel by hand for each meeting configuration, and the collision-avoidance function reduces the risk of motor or bracket damage if furniture or a wall obstruction sits closer to the swing path than originally planned.
The 4.0mm wall plate installs to the wall or cabinet structure first, followed by the motorized swing arm and detachable panel bracket. The motor’s AC 100-240V input connects to standard power, stepping down internally to the 12V DC / 1A output that drives the swing mechanism. Position memory presets are typically programmed after the panel is hung and powered, so the installer can set and test the actual swing angles the room needs rather than relying on default factory positions. Given the weight class and motorized components, professional installation is recommended.
| Product Category | Motorized Swing TV Wall Mount |
| Material | Steel, Aluminum, Plastic |
| Metal Sheet Thickness | Bracket Arm: 1.5mm cold-rolled sheet; Wall Plate: 4.0mm pickling sheet |
| Arm Tube Size | 30x15x1.5mm and 30x20x1.5mm square steel tube |
| Surface Finish | Powder Coating |
| Color | Matte Black, Matte White |
| Dimensions | 56 x 1220 x 430mm (2.2″ x 48″ x 16.9″) |
| Fit Screen Size | 32″-75″ |
| VESA Compatibility | 200×200 up to 600×400, 12 patterns total |
| Maximum Mounting Hole Spread | 600 x 400mm |
| Weight Capacity | 50kg (110lbs) |
| Swing Range | 0° to +170°, motorized |
| Wall Profile | Min. 56mm (2.2″) retracted |
| Extension Range | 775-1220mm |
| Motor Input | AC 100-240V, 50/60Hz |
| Motor Output | DC 12V, 1A |
| Control Method | Radio Frequency (RF) remote |
| Smart Features | Programmable position memory, collision-avoidance |
| Panel Type | Detachable Panel |
| Cable Management | Yes, internal routing along the arm |
The motorized arm swings 0° to +170° on command from a Radio Frequency remote, which doesn’t require line-of-sight to the panel the way an infrared remote does. This means the swing can be triggered from another room or through furniture, useful in lift-cabinet or credenza installs where the mount itself may not be directly visible.
Rated under 50dB, roughly comparable to a quiet conversation, which is quiet enough for bedroom, boardroom, and hospitality-suite installs where a louder mechanism would be noticeable. Confirm this figure against the specific room’s ambient noise requirements for sensitive applications like recording studios or broadcast booths.
The collision-avoidance function stops the motor if the arm encounters resistance mid-travel, rather than continuing to drive against furniture or a wall obstruction. This reduces the risk of motor burnout or bracket damage on installs where the swing path wasn’t fully cleared during planning.
Yes, programmable position memory stores preset swing angles so a user or technician can return the panel to a known position with one command rather than manually re-aiming it each time. This is set up after installation once the actual room-specific swing angles are confirmed.
775mm retracted to 1220mm fully extended, measured from the wall plate to the panel bracket at full swing-out. The wall profile itself is a minimum 56mm when fully retracted. Confirm this range against the available wall-to-obstruction clearance in the room before ordering.
Coverage spans 200x200mm up to a 600x400mm maximum hole spread, across twelve patterns including 300x300mm, 400x400mm, and 600x300mm. Confirm the exact VESA pattern on the target display’s rear panel before ordering, since not every 32-75 inch display uses the maximum spread.
Tell us about your project and our team will recommend the right mounting solution for your display or video wall installation.
