Use the button above or message us on WhatsApp for a quote, technical documentation, or engineering support on the VPM-20-H.
The VPM-20-H is a universal projector ceiling mount rated to 35kg, built with a detachable head section that separates the projector interface plate from the ceiling-fixed extension pipe. The head carries a 130-470mm telescopic drop range, +20° to -20° tilt, +8° to -8° swivel, and full 360° rotation, giving three independent axes to square the projected image to the screen without moving the ceiling fixing point.
The detachable design means the interface plate can be bolted to the projector on a bench and pre-aligned before the whole assembly is lifted and clicked onto the ceiling-fixed head, rather than supporting the projector’s full weight one-handed during final alignment. Cable routing runs through the mount body itself, keeping HDMI and power runs out of view rather than taped along the extension pipe.
The 35kg rating and wide three-axis adjustment put the VPM-20-H in lecture halls, auditoriums, and large conference rooms running high-lumen commercial projectors, where the beam needs precise squaring to a fixed screen from a ceiling position that’s rarely perfectly centered on install. The detachable head matters most in these settings because the projector itself is often too heavy and too electronically sensitive to align safely by hand while suspended.
It also suits UAE corporate campuses and education facilities standardizing on a single universal mount across multiple room types with different ceiling heights, since the 130-470mm drop range covers most standard commercial ceiling clearances from one SKU. Where the projector is lightweight and the ceiling height is fixed and known, a simpler fixed-drop mount may be more cost-effective, but the VPM-20-H is the safer default when either variable is uncertain.
The extension pipe mounts to the ceiling structure first, using the standard 1.5″ North American pipe thread, followed by the head unit at the desired drop length within the 130-470mm range. The projector is bolted to the detachable interface plate separately, ideally at bench height, then the assembly is lifted and clicked onto the head unit rather than being bolted in place while suspended. Tilt, swivel, and rotation are set last, once the projector is hanging and the beam can be checked against the screen. Given the projector weight class and the ceiling-structural considerations involved, professional installation is recommended and available UAE-wide on request.
| Product Category | Universal Projector Ceiling Mount |
| Material | Plastic, Steel |
| Surface Finish | Powder Coating, Matte Black |
| Dimensions | 140 x 470 x 470mm (5.5″ x 18.5″ x 18.5″) |
| Weight Capacity | 35kg (77lbs) |
| Drop Range | 130-470mm (5.1″-18.5″) |
| Tilt Range | +20° to -20° |
| Swivel Range | +8° to -8° |
| Rotation | +180° to -180° (360° total) |
| Pipe Thread Compatibility | 1.5″ North American standard |
| Head Design | Detachable interface plate |
| Installation | Ceiling mounted |
| Cable Management | Integrated, routed through mount body |
It lets the projector interface plate be bolted to the projector and pre-aligned on a bench, then the whole assembly is lifted and clicked onto the ceiling-fixed head unit. This avoids the alternative of supporting a 35kg-class projector’s full weight one-handed while trying to bolt it in place overhead.
The telescopic drop accommodates most standard commercial ceiling clearances from one SKU, avoiding the need for a separate fixed-length extension pipe per room. The exact drop needed depends on ceiling height, projector throw distance, and screen size, so confirm the target range before ordering.
Three: +20° to -20° tilt, +8° to -8° swivel, and a full 360° rotation, all independent of the ceiling fixing point. This lets the beam be squared precisely to the screen even when the ceiling mounting point isn’t perfectly centered relative to the screen.
The mount is universal, using a standard interface plate rather than a projector-specific bracket, and compatible with standard 1.5″ North American pipe threading for the ceiling connection. Confirm the projector’s own mounting-hole pattern matches the interface plate before ordering for a specific model.
Yes, cable routing runs through the mount body itself rather than along the outside of the extension pipe, keeping HDMI and power runs out of view. This is a meaningful difference from mounts that require a separate cable cover accessory for a finished look.
Yes. Given the 35kg weight class and the ceiling-structural considerations involved in a permanent overhead installation, professional installation is recommended and available UAE-wide on request through VSYS for lecture halls, auditoriums, and large conference rooms running high-lumen commercial projectors.
Tell us about your project and our team will recommend the right mounting solution for your display or video wall installation.
