Use the button above or message us on WhatsApp for a quote, technical documentation, or engineering support on the VPM-20-02L.
The VPM-20-02L is a telescopic projector ceiling mount rated to 35kg, built around an extending center pole with a 735-1135mm working range, roughly 2.5x longer reach than the VSYS VPM-20-H’s fixed-drop head unit. The same detachable head design carries over: +20° to -20° tilt, +8° to -8° swivel, and full 360° rotation on an interface plate that separates from the ceiling-fixed pole for bench-side projector alignment.
The extended reach exists for rooms with high or vaulted ceilings, where a fixed-drop mount either can’t reach the correct beam height or forces an ugly, oversized fixed pipe. The telescopic pole adjusts to the actual ceiling height on-site rather than requiring a pre-measured custom-length pipe ordered in advance.
The extended 735-1135mm reach puts the VPM-20-02L in auditoriums, worship spaces, and atriums with high or vaulted ceilings, where a standard fixed-drop projector mount like the VPM-20-H physically can’t bridge the gap between the ceiling structure and the correct beam height for the screen. It’s the mount to specify whenever ceiling height is a known constraint rather than a standard commercial 2.4-3m clearance.
The matte white finish option also fits visible, architecturally finished ceilings across UAE hospitality and worship venues where a black mount would stand out against a light ceiling. Where ceiling height is standard and reach isn’t a constraint, the shorter-range VPM-20-H is the more compact and cost-effective specification.
The telescopic pole mounts to the ceiling structure first, extended to the measured on-site distance within the 735-1135mm range, followed by the head unit at the pole’s lower end. The projector is bolted to the detachable interface plate separately, ideally at bench height, then the assembly is lifted and clicked onto the head unit rather than bolted in place while suspended from height. Tilt, swivel, and rotation are set last, once the projector is hanging and the beam can be checked against the screen. Given the extended pole length and the ceiling-structural considerations involved, professional installation is strongly recommended and available UAE-wide on request.
| Product Category | Telescopic Projector Ceiling Mount |
| Material | Steel, Plastic |
| Surface Finish | Powder Coating, Matte Black or Matte White |
| Dimensions | 1135 x 470 x 470mm (44.7″ x 18.5″ x 18.5″) |
| Weight Capacity | 35kg (77lbs) |
| Extension Range | 735-1135mm (28.9″-44.7″) |
| Head Drop Range | 130-470mm (5.1″-18.5″) |
| Tilt Range | +20° to -20° |
| Swivel Range | +8° to -8° |
| Rotation | +180° to -180° (360° total) |
| Head Design | Detachable interface plate |
| Installation | Ceiling mounted |
| Cable Management | Integrated, routed through pole and head |
Both share the same 35kg rating, detachable head, and three-axis adjustment, but the VPM-20-02L has a telescopic pole extending 735-1135mm, roughly 2.5x the VPM-20-H’s 130-470mm fixed-drop head range. Choose the VPM-20-02L for high or vaulted ceilings that a standard drop can’t reach.
High-ceiling auditoriums, worship spaces, and atriums where the distance from the ceiling structure to the correct beam height exceeds what a standard fixed-drop mount can bridge. The 735-1135mm telescopic pole adjusts to the actual on-site measurement rather than requiring a custom pre-ordered fixed-length pipe.
Matte white is offered alongside matte black for installations with visible, architecturally finished ceilings, common in UAE hospitality and worship venues, where a black mount would stand out against a light-colored ceiling. Specify the finish that matches the installation environment when ordering.
Yes, the detachable head design is shared across both models: the projector interface plate is pre-mounted and aligned on a bench, then the assembly is lifted and clicked onto the pole-mounted head rather than bolted in place while suspended overhead.
Yes, cable routing runs through the telescopic pole and head assembly rather than taped along the outside, keeping HDMI and power runs concealed over the full extended length. This matters more here than on shorter fixed-drop mounts given the longer visible run.
Yes, and more strongly than for the shorter VPM-20-H given the extended pole length and the ceiling-structural considerations at high or vaulted ceiling heights. Professional installation is available UAE-wide on request through VSYS for auditoriums, worship spaces, and atrium installations.
Tell us about your project and our team will recommend the right mounting solution for your display or video wall installation.
