Use the button above or message us on WhatsApp for a quote, technical documentation, or engineering support on the VSPS135-M.
The VSPS135-M’s viewing surface is a matte white PVC-coated fabric (fiberglass-backed fabric optional) rated at 1.0 gain, tensioned across a 3.00 x 1.68m viewing area at a 16:9 aspect ratio, the largest fabric size in the VSPS motorized range. A 4-side black masking border (6cm top, 4cm bottom, 4cm sides) frames the image to lift perceived contrast without altering the projector’s actual output, and the fabric surface is wipeable for spot-cleaning between uses.
The largest fabric in the range stows inside the largest case too, a 322mm square steel roller housing finished in white. Unlike the smaller two sizes, the VSPS135-M is specified with either a standard tubular motor or an optional synchronized motor as a like-for-like swap decision at order time, since large-format and multi-screen installs are more likely to need matched drop timing across units than a single mid-size screen would. Control is by RF remote or a hardwired manual keypad switch either way.
At 3.00 x 1.68m, the VSPS135-M is sized for large auditoriums, lecture halls, and commercial presentation spaces where the back-row viewing distance justifies the largest image in the range rather than stepping up projector brightness alone. The 160° viewing angle keeps side-seating visibility intact even at this scale, and the masking border’s contrast lift remains useful in venues that mix ambient lighting with the projected image, such as a lecture hall with windows or supplementary task lighting.
This is also the size in the range where the synchronized motor option earns its keep: multi-screen installations, such as matched side-by-side screens in a large hall or a video-wall-style presentation setup, need drop timing to match closely enough that one screen isn’t visibly still moving after the others have stopped. Specify the synchronized motor at order time for any project with more than one VSPS135-M in the same room; the standard tubular motor remains the right choice for single-screen installs where only one unit needs to move.
The VSPS135-M mounts to either a wall or a ceiling structure via the roller case’s integrated brackets, then wires to standard power for the motor. As the largest and heaviest unit in the range, confirm the mounting surface’s structural capacity before drilling, and if the synchronized motor variant was ordered, verify the control wiring matches the synchronized-motor wiring diagram rather than the standard tubular motor’s, since the two aren’t interchangeable after installation.
| Product Category | Motorized Electric Projection Screen |
| Screen Size (Diagonal) | 135″ (16:9) |
| Viewing Area (W x H) | 3.00m x 1.68m |
| Gain | 1.0 |
| Viewing Angle | 160° |
| Screen Material | Matte White PVC Fabric (Fiberglass-Backed Optional) |
| Masking Borders | Top 6cm, Bottom 4cm, Sides 4cm |
| Motor Type | Tubular Motor or Synchronized Motor (specify at order) |
| Case Material | Steel |
| Case Dimension | 322mm (12.7″), Square |
| Case Color | White |
| Installation | Wall Mounted, Ceiling Mounted |
| Control | RF Remote, Manual Keypad Switch |
| Maintenance | Wipeable / Cleanable Surface |
| Certifications | CE, UKCA, RoHS, AS/NZS Safety Report |
Yes, at 3.00 x 1.68 meters it’s the largest viewing area in the VSPS motorized electric screen family, ahead of the 120-inch and 100-inch models. The case grows to match, at 322mm square, so confirm mounting clearance before ordering, particularly for ceiling installs in a finished space.
Order the synchronized motor if this screen will drop and retract alongside another VSPS135-M in the same room, such as a matched multi-screen wall. Order the standard tubular motor for a single-screen install where nothing else needs to move in time with it. This choice is made at order time, not after.
No, the motor type is fixed at manufacture and isn’t a field-retrofittable upgrade. If there’s any chance the project will later add a second synchronized screen in the same room, specify the synchronized motor at the time of the original order rather than planning to convert it afterward.
No, the VSPS135-M keeps the same 160° viewing angle and 1.0 gain as the 100-inch and 120-inch models in the range; only the viewing area, masking border dimensions, and case size scale up with screen size. The fabric material and optical properties stay consistent across the whole family.
Confirm the wall or ceiling structure can bear the 322mm steel case and fabric assembly, the largest and heaviest in the range, before drilling any fixing points. If the synchronized motor was ordered, also verify the control wiring matches its diagram rather than the standard tubular motor’s, since they aren’t interchangeable.
Large auditoriums, lecture halls, and commercial presentation spaces where the back-row viewing distance justifies the largest image in the range instead of just increasing projector brightness on a smaller screen. The 160° viewing angle keeps side-seating visibility intact even at this larger scale.
Yes, the VSPS135-M uses the same 6cm top border as the 120-inch model, with 4cm on the bottom and sides, larger than the 100-inch model’s 5cm top border. The proportionally larger border keeps the framing effect visually consistent against the bigger projected image.
Tell us about your project and our team will recommend the right mounting solution for your display or video wall installation.
