Use the button above or message us on WhatsApp for a quote, technical documentation, or engineering support on the VMAE-C024WS.
The VMAE-C024WS pairs two independent gas-spring arms on a shared clamp or grommet base, spaced 65mm apart at the post, rather than requiring two separate single-arm mounts side by side. Each arm self-adjusts its counterbalance to its own monitor’s weight across the 2-9kg range independently, so a mismatched pair, for example a primary display and a smaller secondary panel, both stay locked in position without one arm’s tension affecting the other.
Every dimension matches the single-arm VMAE-C012WS on a per-arm basis: 453mm reach, 133-428mm height travel, +55° to -55° tilt, ±90° swivel, and ±180° VESA rotation on each side. What changes is the shared base, which keeps both monitors on one footprint instead of consuming two separate clamp or grommet points on the desk edge.
Dual-arm desks are the default spec for trading floors, dispatch and control-room seats, and any analyst or developer workstation running two monitors side by side. The shared 65mm-spaced base keeps both screens on one desk-edge mounting point, which matters in dense seating layouts where two separate single-arm clamps might not both fit on the available edge.
For mismatched pairs, a large primary display and a smaller secondary monitor, each arm’s independent counterbalance handles the weight difference without cross-affecting the other side. Desks needing three or more screens, or panels above 9kg per screen, need a different VSYS mount category rather than this dual-arm SKU.
The shared base mounts with either the clamp (10-80mm desktop thickness) or grommet (10-40mm thickness) option, identical to the single-arm SKU, with both arm posts fixed 65mm apart on the same base plate. Each arm’s gas spring is factory-set and self-adjusts once its VESA plate is attached to a monitor; the two arms don’t need to be balanced against each other, since each spring responds only to its own monitor’s weight. A direction indicator on the VESA plate marks correct up/down orientation before the monitor is attached.
| Product Category | Dual Monitor Arm |
| Material | Steel, Aluminum, Plastic |
| Surface Finish | Powder Coating |
| Fit Monitor Size | 17″-32″ (per screen) |
| Weight Capacity | 2-9kg per screen (4.4-19.8lbs) |
| VESA Compatibility | 75×75, 100×100 (per arm) |
| Mounting Type | Shared Desk Clamp or Grommet Base |
| Desktop Thickness | Clamp: 10-80mm; Grommet: 10-40mm |
| Base Post Spacing | 65mm |
| Arm Extension | 453mm (17.8″) per arm |
| Height Range | 133-428mm from base, per arm |
| Tilt Range | +55° to -55° per arm |
| Swivel Range | +90° to -90° per arm |
| Screen Rotation | +180° to -180° per arm |
| Cable Management | Built-in per arm, with direction indicator |
No. Each arm’s gas-spring counterbalance self-adjusts to its own monitor’s weight independently across the 2-9kg range, so a mismatched pair, such as a larger primary display and a smaller secondary panel, works without one arm’s tension affecting the other. Each side is calibrated only to what’s attached to it.
Both arm posts sit on one shared base with a 65mm center-to-center spacing, mounted through a single clamp (10-80mm desktop thickness) or grommet (10-40mm) point. This is narrower than mounting two separate single-arm units side by side, which matters in dense workstation layouts.
Yes, every dimension is independent per arm: 133-428mm height range, +55° to -55° tilt, ±90° swivel, and ±180° rotation. Adjusting one screen’s position has no mechanical effect on the other arm, since they don’t share a counterbalance or pivot point beyond the base.
453mm per arm, identical to the single-arm VMAE-C012WS, measured from the mounting post. Combined with the independent tilt and swivel ranges, this lets each screen reach a different working distance and angle from the same base point.
No, this SKU is built for exactly two arms on one shared base. A three-screen or wider desk configuration needs a different mount category in the VSYS range engineered for that load and footprint, not an extension of this dual-arm base.
75x75mm and 100x100mm on each arm independently, the two most common patterns on 17″-32″ monitors. A direction indicator on each VESA plate marks correct orientation during installation, so both monitors go on right-side-up on the first attempt.
Tell us about your project and our team will recommend the right mounting solution for your display or video wall installation.
